Drilling into The Ground for Concrete

Concrete is a great building material that is cool on the eyes and strong and durable. In fact, it is the density and durability that most people love about it. However, these selling points can also become an obstacle in some situations when the homeowner wants to mount something on the concrete or drill a hole in it for a reason. Drilling concrete, if not done right, could ruin the concrete. The process of drilling concrete is usually more difficult for the older concrete, which is much denser and almost impossible to be drilled with a rotary drill. Whether you are planning to drill into concrete after reading this article or in the next two years, here are the things you should know about concrete drilling.


Generally, if you are planning to drill into concrete, you will need the following materials and equipment:



Hammer drill


-Masking tape

-Large masonry nail



-Compressed air in a can, etc.

It should be noted that you may not need all these tools and materials, depending on the scope of what you are drilling. But once you have the essential tools, the drilling can start.

Step 1:

The first stage of drilling into concrete is to mark the places you want to drill with a pencil on the concrete surface. This stage is the planning stage, and you should determine the depth of each hole. Once you know the depth, you can set your drill stop bar (if it has one) to the depth level. If the drill doesn’t have a stop bar, you can wrap masking tape on the depth where you want the drill to stop.

Step 2:

This is the stage where you wear the protective gear for your eyes and insert the carbide masonry drill bit appropriate for the hole size you want into the drill. It is advisable to hold the drill with both hands and control it not to miss the right spot when it started working.

Step 3:

You should ensure that the first hole you drill is a guide hole, which should be about a quarter of half a quarter of an inch deep. Generally, drills have two levels of speed, and it is best to use the slower speed so you will be able to control it easily. Once you have the guide hole, you can make the drill go faster because it becomes easier to operate. However, it is best to alternate between the speed levels and always keep your grip on the drill.

Step 4:

You may encounter an obstruction in the drilling process. You shouldn’t force the drill to go further to avoid damaging it. Instead, remove the drill and use a hammer and masonry nail to break the obstruction before resuming your drilling gently. You should bring out the drill heroically to brush off any concrete dust that is on it.

Step 5:

Once you’ve drilled to the right depth, use the compressed air to blow the dust in the hole and then vacuum all the debris around. You can now repeat the procedure for all the holes you want to drill.

Are Local Contractors More Popular Than International Contractors?

When it comes to construction, the most crucial choice an owner can probably make is the contractor. The contractor determines almost everything about the project, which is why it is important to make the best choice. But there are always lots of options. One of those options is whether to get a local or international contractor. Both have their advantages and disadvantages, and that is one of the things we look at in this article.

Local Contractors

The local building contractors are usually the most popular within the community. They usually have strong ties to the community in which they operate, and this means people are more familiar with their mode of operations, the people in charge, and all other basic details and sentiments that could influence an owner looking for a contractor for their commercial project.

Why Go for Local Contractor

Hiring your local contractor for your construction project has a ton of advantages. They include:

Easier and More Personal Communication: Yes, we are in the 21st century, and you can easily connect with anyone over the internet. But when it comes to the construction business, nothing beats a face to face communication, and this is what you get with your local contractor. You can always explain everything you need to your contractor physically, gauge their reactions to your requests, and determine a lot about the contractor in just one physical meeting.

Local Knowledge: Construction usually means adhering to local legislation, and no one follows the rule better than someone who has been familiar with the rules all their lives. A local contractor is just that time of construction company. It doesn’t need to research local knowledge because it is familiar with it. Such a contractor will also know what works best in your locality, and you will not have to worry about any problem that may come as a result of the ignorance of the contractor. This also means you will save money, and the contractor will have no delays in meeting schedules. 

Promote Local Business: If you live in an area, you are looking forward to seeing your community’s economic growth. There is no better way to support that than by patronizing local contractors. That way, you are keeping your money within the community, creating jobs, and boosting the economy. 

International Contractors

This is simply a contractor that doesn’t reside in your target area. For you to be aware of an international contractor to the point that you will consider such a contractor for your project, such a contractor must have attained some level of popularity and reputation across different countries.

Why Go for International Contractors

Experience: A multinational construction company doesn’t become one in a day. It takes years of experience in different markets, and when you hire them, you will be getting this wealth of experience and superior expertise.

Highly Qualified Workers: International contractors usually have highly skilled and flexible employees and employ world-class practices on your project.

Which Is Better

Hiring local contractors is not without its cons. Most times, that con lies in that they may not have enough skill, expertise, and experience to handle large scale commercial or industrial constructions, especially those that require specialties. On the other hand, working with an international contractor might mean spending more, less communication, and less control over the project.


A local contractor is best used for residential or small-scale commercial projects, and an international contractor is best for large-scale industrial or commercial projects. For concrete in Denver CO visit this link!